Contents
Minitaur editor disconnected
- only minitaur out / track is necessary
- simply reload the minitaur editor
- If not working unplug / plug the usb cable and reload editor
Minitaur no sound
- change preset
Usamo setup not working
See the recording setup diagram
Launch the test mode using focusrite midi (in any set)
if there is no Midi received
- Check the headphones 2 out is full volume on the soundcard
- Check the routing in Scarlett Mix Control. Daw 3 to output 5 & 6
- Power cycle the whole plug
if midi is received from other tracks:
- Check the soundcard config. Usamo input should be from DAW 3
if there is garbage midi received
- Open focusrite control
- Power down & up soundcard
NB : the midi thru is normally never in cause, no need to check the cables
Audio export not offline
- at least one external instrument is enabled
Prophet white noise
There is electrical interference between some components
- Check if volume is boosted in the device chain
- Power cycle sound card
- Reboot pc
Ctrl-C Ctrl-V / Ctrl-D bug
not copying clips on expected scene
- Clear - restore the in between scene. It should work
Latency is not zero when recording
- test usamo
- launch test usamo command
- re boot computer
- play with sample rate (?)
Prophet noise floor a bit high & recording interferences
- Current solution : using hum destroyer + sym cables to input 5/6
- Tests asym / sym vs with box or not
- How to record synths with no background noise reddit: end of story : gain staging (but it cannot be done on scarlett back inputs imo)
- Le volume du prophet doit toujours etre au max
Clips are duplicated on the wrong scene
- See https://trello.com/c/kMrRJEBn/646-try-to-reproduce-ctrl-c-ctrl-v-not-copying-clips-on-right-scene
- remove some tracks and ctrl-z
- or reload set
Ableton freezes and cannot be killed
- restart the computer